Step-By-Step to Record Your Voice With GarageBand I’m a very visual person so I have provided pictures with each step so it’s easier to understand. The stars are to draw your attention to where certain actions are. Click the Applications Folder in your Hard Drive, Click on GarageBand, which has the icon of a guitar. (If it’s not in. Jul 14, 2017 I'm trying to record an acoustic upright piano using GarageBand on my iPhone. I was using the Voice Memos app previously, but the sound was distorted. GarageBand allows adjusting the recording input level on the slider called 'IN', so I figured this would prevent distorted recordings. You can connect real instruments, such as electric keyboards and guitars to your Mac for use in GarageBand. Using real instruments with GarageBand produces not only better sound, but realistic practice, as you finger the actual instrument and not an on-screen keyboard/string set.

1. Record Voice Software
2. Using Garageband To Record Voice On Ipad Screen

Garage Band is the free app you can use to record your voice and any sound on iPad. If you want to record sound on Mac you can use its desktop version for the job as it is bundled with Apple’s OS X as well. You can also find voice recording software in Windows OS, check out this guide to record sound in Windows 10. Recording Audio using GarageBand on iPad. Run GarageBand on your iPad. Jan 01, 2020  Do you want to create a podcast using only your iPhone or iPad? There are a few different ways you can do just that in 2020 - no need for a fancy studio. Or maybe you just want to create bonus episodes with your iPhone while you’re away from your main recording area.

GarageBand User Guide for iPhone

While the iPad can record some excellent-looking video and record some rather high-quality audio, doing both at the same time can be a little more difficult. Getting scratch audio from the built-in mic is easy within most video recording apps, but that’s about as much as you can use it for. Aug 27, 2018 In simple terms, this allows for a much higher quality recording. With the Apogee Jam, you can plug your electric instrument into one end of the unit via a standard connect 1/4' cable, and into the other end plug your iPhone/iPad using the provided adapters. And, as simple as that, you're rigged to record on your phone or tablet.

Using the Audio Recorder, you can record your voice, an instrument, or any other sound using the microphone on your iPhone, and play it back in GarageBand. You can also record sounds using an external microphone connected to your iPhone.

The Audio Recorder has two sets of controls you can use to change the sound. Fun view lets you quickly change the sound of your recording, while Studio view gives you more options to enhance your recording.

Switch between Fun and Studio view

Record a sound

1. Tap the Record button in the control bar.

2. Play, sing, or make sound into the microphone.

3. When you are finish, tap the Play button in the control bar to stop recording. Tap the Play button again to hear your recording.

Adjust the microphone input level

While you record, the In level slider on the left shows the input level from the microphone. If the level turns red, drag the slider down (or record the part again more softly) to prevent distortion.

1. Drag the In level slider up or down to set the input level.

   The In level slider is available if your iPhone or input source supports input level control.

2. If the input device supports left and right channels, tap Channel button under the In level slider, tap Input 1 or Input 2 to select the input channel, or tap Stereo to record in stereo.

3. When you finish, tap Done.

Set the input level automatically

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPhone, the input level can be set automatically.

• Tap the Input Settings button , then tap the Automatic switch.

Reduce unwanted noise

You can use a noise gate to reduce low-level input noise when you record. A noise gate cuts off the sound when it falls below a certain minimum level.

1. Tap the Input Settings button , then turn Noise Gate on.

2. Drag the Noise Gate slider until the noise stops or decreases to an acceptable level.

3. When you finish, tap Done.

Turn on monitoring for an external microphone

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPhone, the Monitor button under the Out level slider becomes active. Make djay trial forever. How to get tuxera ntfs for free.

• Tap the Monitor button to turn monitoring on. Tap the button again to turn monitoring off.

Change the sound using a preset

The Audio Recorder includes presets that appear after you record a sound. Each preset adds an interesting character to the recorded sound.

1. Do one of the following:

   • In Fun view, tap or turn the dial to select one of the presets.

   • Tap the Navigation button in the control bar, tap the Sounds button, then tap the sound you want to play. You can also swipe left or right on the Sounds button to change to the previous or next sound.

2. Turn the knobs to change the sound of the preset.

You can try out different presets by tapping them and turning the knobs.

Set the key and scale for Extreme Tuning

The Extreme Tuning preset is a popular vocal effect that changes the pitch of your recording based on your song’s key and scale settings.

• Tap the Settings button , tap Key Signature, then tap a new key or a different scale (major or minor).

  On iPhone 8, iPhone 7, or iPhone 6s, tap the Settings button, tap Song Settings, tap Key Signature, then tap a new key or a different scale (major or minor).

If the actual key or scale of your song differs from the key or scale setting, the effect might be less pronounced, or might change the pitch of individual notes in undesirable ways.

Home music production really took off with the introduction of Apple's GarageBand, included with all new Macs. The massive collection of Apple Loops and software instruments included with the program, as well as the huge variety of third-party content available, make it easy for even beginner users to produce professional-sounding songs.

Inevitably though, the time will come when you'll want to add your own vocals to a song you've created in GarageBand. Or perhaps you want to record a podcast or some other non-musical material. So, in this tutorial, we'll show you the basics of recording vocals into GarageBand '11.

Equipment

Before you can begin recording your vocal track, you'll need something to record your voice with and a way to hear what you're doing. Now, you could record your voice through your Mac's built-in microphone and in some cases, like recording a podcast or a simple video voiceover, you could get useable results. However, for recording vocals for a song, unless you're going to be heavily processing the voice track or are looking for an intentionally raw sound, you'll want to use a reasonably professional vocal microphone.

Record Voice Software

There are a million different mics available that are appropriate for vocals, and we aren't going to recommend any specific ones here. But if you're looking to get a vocal sound that compares with professional recordings, one of the standard types of mics used in the recording industry is what's called a large-diaphragm condenser (LDC) microphone. There are many of these available too, with prices that can run into the thousands of dollars for a top-of-the-line model. But for home recording purposes, you can do well for under two hundred dollars.

The advantage of an LDC mic is that they're more sensitive than the standard dynamic mics you're more likely to see on a live stage, and they tend to 'warm up' a recorded voice, which is why they're favored for studio recording. Condenser mics do require an external power source, referred to as phantom power, so if you go for a standalone condenser mic, you'll need to be sure that your audio interface supplies phantom power.

However, there's a more recent development in the world of home recording that you should investigate also: the availability of a variety of USB-powered large diaphragm condensers. These are especially useful for beginner home recordists, because they combine an LDC and an audio interface in one device. Many of them even provide a headphone jack for monitoring. A USB LDC connects directly to the USB port on your Mac; the USB port supplies the phantom power for the condenser. In addition, the USB mic is its own audio interface, so you don't need to purchase a separate interface to plug the mic into. And, as mentioned, most USB mics also have a headphone output that you can use to monitor your GarageBand inputs and outputs.

This is important because if you listen (on external speakers) while you're recording your vocals, the mic will either feedback into itself, or you'll pick up your instrumental tracks through the mic along with your voice, and you won't be able to mix the final results properly.

By the same token, you'll ideally want to use closed-ear headphones rather than earbuds for monitoring; closed-ear phones generally sound better than earbuds, and also provide more insulation against audio leakage into your mic while recording. And because LDC mics tend to be more sensitive to picking up Ps and other popping sounds, a pop filter is also a good investment. Pop filters are small screens that you mount in front of the microphone to reduce the force of those 'P' vocal sounds (called plosives) without affecting the basic tone quality of the voice.

Step 1 - Create a New Track

OK, assuming you have all your vocal recording gear set up and that you already have an instrumental track in your GarageBand project to record over, you'll need to create a new track to record into. Choose Track > New Track.. (Command-Option-N), then click Real Instrument. Under 'My instrument is connected with', choose your mic input (if you're using a USB mic, it will probably appear as USB Audio CODEC rather than the actual name of the mic). Under that, choose your input channel (which for a USB mic will probably default to Mono 1). Under 'I hear sound from', choose your monitoring output (again, choose USB Audio CODEC if you want to monitor through the mic's headphone output. Otherwise choose your available output device). Finally, click the 'I want to hear my instrument as I play and record' checkbox to hear your voice through your monitoring device as you sing:

Then click 'Create' to make the new track.

Step 2 - Set Your Monitor Source

When you create the new track, the Track Info Pane will automatically open to the right of your tracks. You've already set your input source, so don't worry about that. But you do want to set your monitor source in the Monitor pop-up menu: choose 'Off' to disable monitoring, choose 'On' to monitor your mic and the instrumental track through speakers, or choose 'On (no feedback protection)', which is specifically designed for headphone monitoring, which is what we want here:

Step 3 - Set Your Record Level

Next, sing or speak into your mic and look up in the track name area at the record level meters for your new track (it's located above the slider). Note that this slider doesn't affect the input level, just the playback level. For a USB mic, the recording level is probably set on the mic itself; otherwise you set it in the Track Info area where we just set the Monitor source.

So, while singing or speaking, adjust your recording level so the meters read, on average, in the upper end of the green area. It's OK if the meters go into the amber range occasionally, but don't hit the red marks at the ends of the meters otherwise you'll get distortion in your track.

Using Garageband To Record Voice On Ipad Screen

Step 4 - Set Effects for the Track

At this point, you can just start recording your vocals, but many people like to hear what vocal effects will sound like on the track as they record it, so they can respond to the effect while singing. This is strictly a matter of taste but for now, let's apply effects while recording.

So, with the track selected, click on Vocals in the right side of the Browse tab in the Track Info Pane, then choose different vocal effects settings while singing and listening to the results. Again, this is a matter of taste and you can always change the effects setting after recording. For now, choose Pop Vocals from the list:

Step 5 - Record!

Alright, let's record: with your new track selected, drag the playhead to the location in the track where you want to start recording (or click the 'Go to the beginning of the song' button in the Transport), then click the Record button to begin recording. You'll hear your instrumental track playing back (adjust its playback level with the Set the track volume slider if necessary) and as you sing, you'll see your vocal track appear in red in track window. When you're done recording, hit the Spacebar to stop, after which your track will appear in purple:

Rewind back to the beginning and hit Spacebar again to hear your recording, adjusting the relative track volumes as needed. If you don't like what you just recorded, simply undo to remove the recording and record again.

And those are the basics. From here you can, for example, try applying different vocal effects to your vocal track by just choosing them from the browser, or you can add another vocal track by recording into a new track.

Did you know there are plenty more tricks on recording audio in GarageBand? Learn more in Garageband'11 101.